Question: Will A 6500 Watt Generator Run A Well Pump?

How many watts does a 1.5 HP well pump use?

1125 wattsSo a 1.5 HP pump will consume roughly 1125 watts..

How big of a generator do I need to run a well pump?

In the case of a 1 HP standard submersible well pump; a 3-4 KW generator is required for the well pump to be able to start, even though 1 KW is the amount of power the pump uses when it is running.

How much can you run on a 6500 watt generator?

A 6,500-watt generator will allow you to run most common household appliances, including a fridge, a dryer or a television.

Will a portable generator run a well pump?

Will a portable generator work? Unfortunately no. Unlike many of your appliances that plug into an electrical outlet, your well pump is hard-wired into your home’s electrical circuits.

Will a 3500 watt generator run a well pump?

In addition, remember that you may need to run a well pump or sump pump. These have high starting power requirements (over 2,000 watts each), so you can probably only run one or the other on a 3,500-watt generator.

How many watts does it take to run a well pump?

GeneratorJoe Generator Wattage GuideHousehold & OfficeRunning WattageStarting WattagePump, Well, 1/2 HP9002000Pump, Well, 3/4 HP15003000Pump, Well, 1 HP20004000Pump, Well, 1 – 1/2 HP25005000141 more rows

Will a 2000 watt generator run a well pump?

Powering a Sump Pump or Well Pump A 2000 watt generator could start up the sump pump and then keep it running during a storm, and once running and drawing 800 watts, you could use the same generator to power the 1000 watt water well pump.

What size generator do I need to run a well pump and refrigerator?

You can run the most critical household equipment with a generator rated at 5,000 to 7,500 watts. These include things like a well pump, refrigerator and freezer, and lighting circuits. A generator with around 7500 running watts can run all these appliances at once. For RV, a 3000 – 4000-watt generator would be ideal.

Are well pumps 120 or 240?

240V is preferred because submersible pumps are often well away from the house and deep down in the hole and you must run a wire there capable of supplying its power needs without too much voltage drop in the line. … By the way, keep in mind that a 500W pump may need a 1500W inverter to start it up.

Will a 4000 watt generator run a well pump?

Operating a sump pump, freezer, refrigerator, and furnace will use up to 4000 watts. Add in some lights, a small television, and a microwave oven, and a 7500-watt unit is working close to its continuous capacity.

Can I plug my well pump into a generator?

You just need to disconnect the pump from the extra disconnect. Use that wire as the extension cord and put a male plug on it. Then add a female plug under the extra disconnect like the one on the generator. That way it can only be plugged into one thing at a time.