What Gear Ratio Is Best For Fuel Economy?

Is it better to have a higher or lower gear ratio?

The higher the number the better the car will accelerate, but at the expense of high speed cruising.

Now for the confusing part of the story.

A high numerical gear ratio is called a low gear or low rear end, and vice versa.

Low gears give fast acceleration, high gears give better cruising..

Are 4.10 gears good for highway?

Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.

Is 3.55 or 3.73 gears better?

3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.

How does gear ratio affect fuel economy?

Gear Ratio Effect The effect is generally minimal and will account for less than a single mile per gallon, and typically the gains are generally seen at highway speeds. … The transmission gearing directly affects the fuel economy at a given speed. The engine’s rpm and fuel consumption are generally lower in higher gears.

Are 3.73 or 4.10 gears better?

Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed. So, by changing your gear ratio, no power levels are being changed, just the torque….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOLower torqueHigher torqueBetter gas mileageWorse gas mileageHigher top speedLower top speed1 more row•May 12, 2020

Does higher gear ratio mean faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.

Is 3.73 a good gear ratio?

FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.

What is the best gear ratio for 35 inch tires?

Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance. Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches.

Are 3.73 gears good for highway?

Well, if you plan on doing a lot of freeway driving, you don’t want to choose a gear that’s too low for your car because you’ll be going down the freeway at too high of an RPM. … Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc.

Is 3.42 or 3.73 better?

The difference in towing mpg between the 3.42 and 3.73 gears at highway cruise speed, under the same conditions, should be less than 1 mpg because of the slightly higher rpm running 3.73s. Vehicle speed actually plays a bigger role in fuel economy than engine rpm.

Does gear ratio affect horsepower?

This method will measure horsepower (and torque) at the drive wheels and not at the flywheel. Power output using this method will normally be 15 to 20 percent lower since drive train losses are taken into account. … Axle or transmission gears with a ratio of 4.55 to 1 have a lower gear ratio than one that says 3.27 to 1.

Is 3.23 a good gear ratio?

The engineers likely chose the numerically low gear ratio for fuel economy reasons. … A later swap to a four-speed and 3.23 rear gears woke up the performance of the car considerably. Yes, highway rpm increased as well, but I rationalized it by deciding that 3.23 gears provided a good balance of performance and economy.

What gear ratio is best for speed?

A gear with a lower numerical ratio, like 3.08:1, does not multiply torque as much, but with an equal rpm input will produce a higher axle or tire speed, all else being equal. This means that rear gear ratios are a compromise.

What are 4.11 gears good for?

4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.

How fast can you go with 4.10 gears?

With 4.10s…. With stock size tires you can go 150 mph at 5393 rpm in 5th gear. Check out the rpm calculator in the tech section.